...
Alarm Security Inc. Logo

Call us today at

847-390-9600
For a no obligation consultation

ADDRESS

1245 Forest Avenue, Unit 13
Des Plaines, Illinois 60018

Fire Alarm Inspection & Testing for Illinois Commercial Buildings

A fire alarm that hasn't been tested is a guess. Our certified technicians inspect and test every device on your system to NFPA 72, fix what fails, and hand you clean paperwork your fire marshal and insurer will accept.

Since 1982

40+ years protecting Illinois properties

UL listed

Alarm provider and central station

Bosch authorized

Security dealer

24/7 monitoring

Live operators, every night of the year

What a fire alarm inspection actually has to prove

An inspection isn't a walk-through with a clipboard. It has to prove that every detector, pull station, horn, and strobe works, that the panel reports trouble correctly, and that signals reach the monitoring station.

Then it has to be documented.

We see the same problems over and over. Smoke detectors past their replacement date. Batteries nobody has load tested. A notification circuit that went quiet during a remodel. Records stuffed in a binder no one can find when the inspector shows up. We test, repair, and log all of it so nothing gets missed.

Who we inspect and test fire alarms for

  • Property managers who need clean reports for every building they run
  • Restaurants and retail stores facing annual fire marshal visits
  • Schools and daycares with strict occupancy and drill requirements
  • Healthcare and senior living facilities with accreditation reviews
  • Warehouses and manufacturers tied to insurance requirements

Need a new system or an upgrade? See our fire protection systems and 24/7 fire alarm monitoring pages.

What our inspection and testing covers

Every visit follows NFPA 72 and your local fire code. Here's what gets checked.

Fire alarm control panel

We check power supplies, trouble and supervisory signals, event history, and panel programming.

Checked: every visit

Smoke and heat detectors

Each detector is functionally tested and checked against its manufacturer replacement date.

Checked: every initiating device

Pull stations

Every manual station is operated to confirm it sends an alarm signal to the panel.

Checked: every pull station

Horns, speakers, and strobes

We confirm every notification device sounds and flashes, and covers the areas it's meant to.

Checked: every notification circuit

Backup batteries

Batteries are load tested and replaced if they can't carry the system through an outage.

Checked: every panel and power supply

Monitoring communication

We send test signals and confirm our central station receives them correctly.

Checked: every monitored account

What inspection day looks like at your building

Here's how a typical annual inspection runs at a mid-size office building.

8:00 AM

Technicians check in and notify the station

We put your account in test mode so the fire department isn't dispatched during testing.

8:30 AM

Panel and batteries tested

We review the panel, load test batteries, and check every trouble and supervisory signal.

9:30 AM

Every device tested floor by floor

Detectors, pull stations, horns, and strobes are tested one by one. Tenants get a heads-up first.

12:30 PM

System restored and verified

We clear the panel, confirm normal status, and take the account out of test mode.

Next day

Report delivered

You get a written report listing every device tested, any failures, and a quote to fix them.

Visual check, testing, or full service plan?

Not every visit is the same. Here's what each level of service includes.

We'll set a schedule that matches your code and insurance requirements.
Service What's included Best for Limits
Visual inspectionWalk-through of devices, panel, and wiring for visible damageBetween scheduled testsDoesn't prove devices actually work
Inspection and testingFunctional test of every device with a written reportAnnual code complianceRepairs quoted separately
Full service planScheduled testing, repairs, records, and priority serviceOwners who want it handledAnnual agreement
Failed inspections cost

Failed inspections cost more than the repair

A failed inspection can mean re-inspection fees, insurance trouble, or an order to post a fire watch until the system is fixed. Most failures are preventable. Here's how we keep you ahead of them.

  • !
    Scheduled reminders: we track due dates so you don't have to
  • !
    Repairs on the spot: common parts ride on our trucks
  • !
    Clean records: every test is logged and easy to hand over
  • !
    Replacement tracking: we flag detectors nearing end of life
  • !
    Inspector support: we can be on site when the fire marshal visits

How it works

Whether we installed your system or not, getting on a schedule is simple.

1

System review

We review your panel, device count, and past reports to see where your system stands.

2

Schedule set

We set testing dates around your business hours and tenant needs.

3

Test and repair

Certified technicians test every device and fix what they can on the same visit.

4

Report and follow-up

You get a written report, and we remind you before the next test is due.

Fire alarm inspection FAQs

How often does a fire alarm need to be inspected and tested?

NFPA 72 requires most fire alarm devices to be tested at least once a year, with some components checked more often. Your local fire department or insurer may set stricter schedules. We'll build a calendar that covers all of them.

Can you inspect a fire alarm system you didn't install?

Yes. We service most major fire alarm brands and can take over inspection and testing on an existing system, along with monitoring if you need it.

Will the fire alarm go off during testing?

Yes, devices are tested live, so horns and strobes will sound. We schedule around your hours, give tenants notice, and put your account in test mode so the fire department isn't sent.

What happens if something fails?

We note it in your report and fix it on the spot when we have the part. Anything else gets a written quote. We'll tell you if a failure affects your compliance.

Do I get a report for the fire marshal?

Yes. Every inspection ends with a written report listing each device tested and the result. Keep it on site or we can send it to your fire department or insurer.

How long does an inspection take?

A small business is often done in a few hours. Larger buildings may take a full day or more, depending on the number of devices and floors.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.