Commercial IP Camera Installation in Chicagoland
Grainy footage of a hooded shape doesn't help anyone. We design and install IP camera systems that capture faces, plates, and details you can actually use, then set them up so you can find the right clip in seconds.
Since 1982
40+ years protecting Illinois properties
UL listed
Alarm provider and central station
Bosch authorized
Security dealer
24/7 monitoring
Live operators, every night of the year
What a camera system actually has to do
A camera system has to do more than record. It has to capture the right view, in usable detail, day and night, and let you find what you need fast.
Coverage isn't the same as evidence.
We see it all the time. A camera aimed at the whole parking lot that can't read a single plate. A lobby camera blown out by sunlight from the front doors. A recorder that only keeps three days of video. We pick each camera, lens, and mounting spot for a specific job, so the footage holds up when you need it.
Who we install IP camera systems for
- Retail stores watching registers, entrances, and stockrooms
- Warehouses with loading docks, yards, and large open floors
- Offices and multi-tenant buildings with lobbies and parking
- Auto dealerships with big lots and high-value inventory
- Schools and churches that need to keep people safe
Want smarter alerts from your cameras? See our AI video analytics and cloud storage and remote viewing pages.
What goes into an IP camera system
Every camera has a job. Here are the pieces we use to make sure it does it well.
Dome and turret cameras
Compact cameras for indoor and covered areas. Hard to tamper with and easy to blend into a ceiling.
Best for: lobbies, hallways, registers
Bullet cameras
Long-range outdoor cameras built for weather, with a clear visible presence that deters trouble.
Best for: parking lots, building perimeters
PTZ cameras
Pan, tilt, and zoom to follow activity across large areas, manually or on a set tour.
Best for: yards, lots, large warehouses
Night vision and low-light imaging
Infrared and low-light sensors that keep detail visible after dark.
Best for: exterior areas and after-hours coverage
Network video recorder (NVR)
Stores video on-site with enough capacity for the retention period you need.
Best for: every system
Power over Ethernet (PoE)
One cable carries both power and video to each camera, for a cleaner, more reliable install.
Best for: new installs and upgrades
What happens when a delivery goes missing from your dock
Here's how a typical package theft gets solved at a warehouse with an ASI camera system.
Delivery dropped at the dock
A driver leaves three boxes by the dock door before your team arrives.
Someone walks off with a box
A person walks up, grabs a box, and leaves. The dock camera records it in full detail.
Your manager notices the gap
The count is short. Instead of guessing, your manager opens the camera app.
Clip found in minutes
Searching the dock camera between 6 and 9 a.m. pulls up the moment, with a clear view of the face and vehicle.
Footage sent to police
The clip is exported and shared with police and your insurer, time-stamped and ready to use.
Analog, IP, or hybrid: which camera system fits?
If you already have cameras, you may not need to start over. Here's how the options compare.
| Type | Best for | Pros | Trade-offs |
|---|---|---|---|
| Analog (HD over coax) | Older sites with existing coax cable | Reuses cable, lower upfront cost | Less detail, fewer smart features |
| IP cameras | New installs and full upgrades | High resolution, smart features, PoE | May need new network cabling |
| Hybrid | Sites upgrading in stages | Keeps working cameras, adds IP where needed | Needs a recorder that supports both |

Footage you can't use is footage you don't have
The worst time to learn your cameras are blurry is right after a break-in. Here's how we make sure your footage holds up when it counts.
- Right resolution: higher detail where faces and plates matter
- Right lens: field of view matched to what each camera must see
- Lighting checks: we plan for glare, backlight, and darkness
- Smart mounting: heights and angles that capture faces, not hats
- Proper retention: storage sized to keep video as long as you need
How installation works
You'll see exactly what each camera will cover before any cable gets pulled.
1
Site walk
We walk your property, mark the views that matter, and check lighting day and night.
2
Camera plan
You get a camera layout, equipment list, and retention plan, with a fixed price.
3
Install and aim
Technicians install and aim every camera, then check the image from each one.
4
Training and support
We set up the app, show you how to search and export clips, and stay on call for service.
IP camera installation FAQs
How many cameras does my business need?
It depends on your entrances, sensitive areas, and what you need to see. A small store may need four to eight cameras, while a warehouse can need dozens. We'll lay it out during a site walk.
Can you use my existing cameras or cabling?
Often, yes. Working analog cameras can stay on a hybrid recorder, and existing network cable can sometimes be reused. We'll test what you have before recommending anything new.
How long is video stored?
That depends on how many cameras you have, their resolution, and the storage you choose. Most businesses keep 30 days or more. We size storage to match the retention you need.
Can I record audio with my cameras in Illinois?
Be careful. Illinois law generally requires consent from everyone involved to record private conversations. We usually recommend video-only recording unless you have clear signage and legal guidance.
Can I watch my cameras from my phone?
Yes. Every system we install includes app access for live view and playback, so you can check in from anywhere.
Do cameras work at night?
Yes. Our cameras use infrared or low-light sensors to record clear video in the dark. We check night images during setup to confirm they're usable.
