...
Alarm Security Inc. Logo

Call us today at

847-390-9600
For a no obligation consultation

ADDRESS

1245 Forest Avenue, Unit 13
Des Plaines, Illinois 60018

Gas & Carbon Monoxide Detection for Homes and Commercial Buildings

Carbon monoxide has no smell, no color, and no warning. Gas leaks can turn dangerous fast. Our monitored detectors alert our central station the moment levels rise, so help is on the way even if everyone inside is asleep.

Since 1982

40+ years protecting Illinois properties

UL listed

Alarm provider and central station

Bosch authorized

Security dealer

24/7 monitoring

Live operators, every night of the year

What gas and CO detection actually has to do

Gas and CO detection has to notice a danger you can't see or smell, and get people out before it hurts them.

Sleeping people can't react.

A battery CO alarm on the wall works if someone is awake to hear it and knows what it means. In a building full of sleeping tenants, a classroom, or a closed business, that's not a safe bet. Monitored detectors send the alarm to our station, and our operators get the fire department moving right away.

Who we install gas and CO detection for

  • Apartment buildings and condos with gas furnaces and water heaters
  • Restaurants with gas ranges, fryers, and commercial kitchens
  • Schools and daycares with fuel-burning heating equipment
  • Parking garages and loading docks with vehicle exhaust
  • Homes with gas appliances, fireplaces, or an attached garage

Adding smoke detection too? See our fire protection systems and environmental control systems pages.

Gas and CO detectors we install

The right detector depends on the gas you're protecting against and where it collects.

Carbon monoxide detectors

Detect CO from furnaces, water heaters, generators, and vehicles, and report to our station.

Best for: near sleeping areas and fuel-burning equipment

Combination smoke and CO detectors

One device that covers both fire and carbon monoxide, with distinct alarm signals.

Best for: homes, apartments, hotel rooms

Natural gas detectors

Sense methane leaks from gas lines and appliances before levels become dangerous.

Best for: kitchens, mechanical rooms, boiler rooms

Propane detectors

Placed low, since propane is heavier than air and collects near the floor.

Best for: rural homes, workshops, equipment areas

Refrigerant leak sensors

Detect leaks from cooling systems that can displace oxygen in closed rooms.

Best for: cold storage, machine rooms

Garage CO and ventilation control

Measure CO in parking areas and can turn on exhaust fans when levels climb.

Best for: parking garages, loading docks

What happens when a furnace leaks CO at 2 a.m.

Here's how a typical overnight CO event plays out in an apartment building with monitored ASI detectors.

1:50 AM

A furnace flue starts leaking

A cracked flue in the basement begins sending carbon monoxide into the building. Tenants are asleep.

2:05 AM

CO detector goes into alarm

The detector near the boiler room senses rising CO, sounds locally, and signals the panel.

2:05 AM

Our operator gets the signal

The CO alarm reaches our central station with your address and the detector location.

2:06 AM

Fire department dispatched

The operator dispatches the fire department, which can measure CO levels and help clear the building.

2:07 AM

Building contacts notified

Your property manager or owner gets a call so they can meet responders and arrange repairs.

Battery alarm, hardwired, or monitored detection?

All three can detect gas or CO. They differ in who finds out and how fast.

We'll confirm what your building and local code require during your free consultation.
Type Best for Pros Trade-offs
Battery or plug-in alarmSingle rooms in a homeLow cost, easy to installOnly helps if someone hears it
Hardwired interconnectedHomes and small buildingsOne alarm sounds them allNo one is called if the building is empty
Monitored detectionApartments, schools, businessesStation dispatches help 24/7Monthly monitoring fee
You can't smell carbon monoxide

You can't smell carbon monoxide

Early CO poisoning feels like the flu: headaches, dizziness, tiredness. People often don't realize anything is wrong until it's serious. Here's how we make sure a detector's warning reaches someone.

  • !
    Correct placement: detectors near sleeping areas and gas equipment
  • !
    Monitored alarms: our station calls the fire department
  • !
    Supervised devices: trouble alerts if a detector stops working
  • !
    Replacement tracking: we flag detectors nearing end of life
  • !
    Clear training: occupants learn what each alarm sound means

How setup works

We start with where gas could leak and where people spend their time.

1

Site walk

We locate fuel-burning equipment, gas lines, garages, and sleeping or occupied areas.

2

Written proposal

You get a detector plan that meets your local code, with a fixed price.

3

Install and test

Technicians install each detector and test signals with our central station.

4

Training and support

We explain alarm sounds and response steps, and replace detectors as they age.

Gas and CO detection FAQs

Does Illinois require carbon monoxide detectors?

Yes. Illinois law requires CO alarms in most homes with fuel-burning appliances, a fireplace, or an attached garage, within 15 feet of every sleeping room. Commercial buildings may have added requirements under local code.

Where should CO detectors be installed?

Near sleeping areas, on every level, and close to fuel-burning equipment like furnaces and water heaters. We'll lay out placement based on your building and local code.

What's the difference between a CO detector and a gas detector?

A CO detector senses carbon monoxide, a byproduct of burning fuel. A gas detector senses fuel itself, like natural gas or propane, leaking before it burns. Many buildings need both.

What happens when a monitored CO alarm goes off?

The signal goes to our central station, and the operator dispatches the fire department and calls your contacts. Get everyone outside to fresh air and wait for responders.

How long do CO detectors last?

Most CO detectors need to be replaced every 5 to 10 years, depending on the model. Each one has a date on it, and we track replacement dates for our customers.

Can CO detectors connect to my existing alarm system?

Usually, yes. Most modern panels support monitored CO detectors. We'll check your system and tell you what's needed.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.